7 Safety tips for operating a boom lift

Here at All Star Access Hire & Scaffold we are your dedicated access hire Melbourne specialists.

icon

Customer Service

icon

Low Emission Targets

icon

24/7 support

icon

Industry Leading Machinery

Category
Hire
READ TIME
3 minutes
All Star Access Hire

When operating large equipment such as a boom lift, it’s important to pay due diligence to Work Health and Safety (WHS) Regulations and ensure your operators hold all necessary licences. Training your personnel will go a long way in preventing injuries and even death on work sites. If you need to know precisely which kind of boom lift will best suit your project, call us at All Star Access Hire so that we can conduct an on-site assessment to determine the equipment you need. Read on for some essential tips on boom lift safety.

1. Clear the circumference

For top boom lift safety, ensure that the base and circumference of the equipment are completely clear of impediments, including objects and personnel. Objects becoming lodged under the boom lift base may cause tipping, while staff members may become injured if tools are dropped onto them from the bucket above. It requires a certain amount of spacial and safety awareness to maintain WHS standards on construction sites and other work areas.

2. Train your operators

Training can be the difference between safe and unsafe boom lift practices. It’s essential for boom lift safety that only suitably trained workers operate this kind of equipment and that they keep up to date with all training requirements. At the very least, licences, such as the EWPA Yellow Card and the WorkSafe WP Licence, cover the safe use of EWPs of various sizes.

3. Strap them in

Ensure your personnel secure their harnesses to the bucket for extra safety. You never know when a bump, gust of wind, or piece of uneven ground can cause workers to lose their footing in the bucket. In such instances, a harness could prevent injury or even death, so while it may seem like a technicality, it is worth following. Many safety procedures may initially seem unnecessary until workers find themselves in that one dangerous situation that could even be their last. It’s always better to be safe than sorry.

4. Adhere to limits

For boom lift safety, you must adhere to your equipment’s specific weight capacity, including the contributing weights of all workers and tools used on the boom lift. Ignoring the weight capacities of boom lifts could cause the machine to tip over. Always use the right equipment for the right job – for example, for lifting heavy supplies, you should use a crane or materials handling equipment, not a boom lift.

5. Don’t reach out

When you’re on the boom lift platform, it can be tempting to reach over the side of the platform to carry out a task, but this is a dangerous move. It is always better to reposition the boom lift properly so that you can reach areas you need to pay attention to without falling over the platform’s edge. When in doubt, communicate with the boom lift operator to allow safe reach while working at heights.

6. Avoid wind

Windy conditions can be a problem when a boom lift is fully extended, as it can cause the machine to tip or blow over. For better safety, avoiding using this equipment in extreme weather is a good idea. There should be details in the machine’s operating manual on how much wind it can take before it becomes a hazard.

7. Choose the right boom

As boom lifts extend so high, they can be particularly susceptible to tipping over. That’s why it’s vital that you choose the right boom lift for the task at hand. Your best bet is to hire a rough terrain model or even a spider boom for uneven ground. These specific machines allow for greater safety in challenging terrain.

See our full range of boom lifts or contact us to discuss your equipment needs.